Detailed Product Description

Fingertip Oximeter

Features:

1) Lower voltage alarm display;z

2) Easy to use with one-key operation

3) High accuracy and repetition

4) Automatic power-off without signal for 8 seconds

5) SpO2 and pulse monitoring, and histogram of pulse display

6) It is light with gross weight of 50g, batteries included, small in size, and easy to carry

7) Tow AAA batteries are required for operation with low power consumption, and the continuous working times is 100 hours.

The Scope of Application:

The Fingertip Oximeter can monitor pulse oxygen saturation and pulse rate through patients finger. This device is applicable to hospital, home, oxygen bar, the community medical center, alpine area and it also con be used before or after sports, and so on. This device in not appropriate to be used for continuous monitoring.

Technical Specifications:

1.  Display mode: LCD Display

SpO2 display: 2-digit and 7-segment digital display

Pulse rate display: 3-digit and 7-segment digital display

Pulse waves intensity display: 6-segment bar-graph display

Low battery voltage indication: Segment LCD Signal

2.  Measuring range: SpO2 display: 50% ~ 99%

Resolution: ±1%

Pulse rate display: 30bpm-240bpm

Resolution: ±1bpm

3.  Power supply requirement: 1.5V (AAA size) alkaline battery ×2

Battery voltage: 2.6V-3.3V

4.  Operating current:: 10mA

5.  Resolution: SpO2: ± 1% Pulse rate: ±1bpm

6.  Accuracy: SpO2±2% (during 80%~99%) and ±3%

(during 70%~79%)

pulse rate ± 2bpm

7.  Measurement at low perfusion:

The values of SpO2 and pulse rate can be displayed properly when pulse saturation is more than 0.5%.

8.  Resistance to surrounding light:

The difference between the value measured in the condition of indoor natural light and that of darkroom is less than ± 1%

9.  Resistance to interference of man-made light:

Values of SpO2 and pulse rate can be accurately measured by pulse oxygen simulator.

10.  Automatic shutdown function:

The device will power off automatically in 8 seconds when there is no finger in the device.

11.  Photosensitive componentsL red light (wavelength: 660nm) and infrared (wavelength: 940nm)

12.  Dimensions: 66 (L)×36(W)×33MM(H)

13.  gross weight: 50g

Accessories:

1.  A hanging rope

2.  Four batteries

3.  A pouch

4.  A User Manual